+90 312 395 14 96 na-me@na-me.com.tr

Composite (GFRP) Profile Products | U, Angle, I Beam, Tube

Composite (GFRP) Profile Products

All profiles are pultruded in-house with constant cross-section and cut to the length you need. The groups below show our standard programme; download the full dimension list from the Documents page. Custom sections are produced on a project basis.

bh

GFRP U Channel

The workhorse section for channels, frames and cable support; widely used in grating frames and platform edge trims. Produced in 10 standard sizes.

Range: 26×60×3 – 300×75×12 mm · e.g. 100×30×6, 150×38×6, 200×60×10
bh

GFRP Angle

L-section angles for corner joints, seats and framing — the corrosion-free alternative to steel angles. Produced in 9 standard sizes.

Range: 20×20×4 – 100×100×8 mm · e.g. 40×40×5, 60×60×6, 75×75×9
bh

GFRP I Beam

For load-bearing beams requiring high moment of inertia; the main carrier of platform and walkway structures. Produced in 9 standard sizes.

Range: 30×15×4 – 300×150×12 mm · e.g. 150×75×8, 200×100×10, 250×125×10
aa

GFRP Square-Rectangular Tube

Hollow square and rectangular sections offering equal stiffness in both axes for posts, frames and handrail systems. Our largest group with 30+ standard sizes.

Range: 25×25×3 – 175×175×17 mm · e.g. 50×50×5, 100×100×8, 120×120×10
bt

GFRP Flat Strip

Flat strip sections used as support plates, connection elements and insulation spacers; available up to wide plate widths.

Range: 20×5 – 850×8 mm · e.g. 50×6, 100×10, 610×6
Ød

GFRP Rod

Solid round rods for electrical insulation elements, anchors and supports.

Range: Ø6 – Ø55 mm · e.g. Ø12, Ø20, Ø40

Gear-Corrugated Tube (Ladder Rung)

Corrugated-surface rung tube used as the anti-slip step of composite ladders.

Standard size: Ø30×3 mm
r

GFRP Top Rail

Ergonomic top rail section; combined with tube posts it forms a complete composite handrail system.

Standard sizes: 50×46×4, 63×46×4, 75×62×4 mm
h

GFRP Kick Plate

Toe board profile preventing objects falling from platform edges — the edge protection required by safety regulations.

Standard sizes: 100×10×3, 150×15×5 mm