HDPE Grating Products and Dimensions
HDPE (Polyethylene) GratingsThe product range provides a robust polymer grating base that can be matched to the required clear opening, support layout and installation detail.
Product Configurations
This page records the current reference drawing, dimensional table and colour chart for an HDPE grating enquiry. These references do not establish load capacity, support span, reinforcement, slip performance, chemical compatibility or availability. Those points must be confirmed for the required configuration and project conditions.
Dimension Drawing and Table
| A (mm) | B (mm) | C (mm) |
|---|---|---|
| 20 - 50 | 500 | 150 |
| 20 - 50 | 500 | 200 |
| 20 - 50 | 500 | 250 |
| 20 - 50 | 500 | 300 |
| 20 - 50 | 500 | 350 |
| 20 - 50 | 500 | 400 |
| 20 - 50 | 500 | 450 |
| 20 - 50 | 500 | 500 |
| 20 - 50 | 500 | 550 |
| 20 - 50 | 500 | 600 |
Existing published dimensional tolerance: ±5 mm. Confirm the applicable configuration and current product record before quotation or ordering.
Colour Options
The current visual reference contains the colour samples below. They are not an availability or colour-match guarantee; confirm the required colour against the current product record and project acceptance criteria.
Information Required for Selection
- Intended use and installation location
- Required panel dimensions and quantity
- Clear span, support arrangement and edge conditions
- Distributed, point and moving loads
- Whether a reinforced configuration is under consideration
- Operating temperature and chemical exposure
- Surface, drainage, cleaning and slip requirements
- Fixing details, colour requirement and acceptance criteria
Request a Technical Review
Submit the drawing, load case, support conditions, environment and quantity together. The relevant dimensions, configuration and commercial scope can then be checked against the current product record.